Time Tables

Overview and Key Concepts

Time Tables are used to schedule state changes, such as scheduled down-time, for specific objects in the model. Each Time Table may control many objects, and each object may be controlled by many Time Tables. A model may contain any number of Time Tables.

Time Tables are accessed from the Toolbox.

Functions

When the Time Table hits a down time, two sets of functions are called. First, the Down Function is fired. This happens once for each member of the Time Table. This allows you to stop the associated object, send a TaskExecuter to some specified location, etc. After all of the Down Functions have fired, the On Down function will fire once. The On Down function passes in the list of members and the table row associated with the down time.

Down State and State Profiles

For each down time you can specify the state and state profile that the members will go to during that down period. An object can be tied to multiple Time Tables and be stopped multiple times. Each object stores it's set of states each time it is stopped so the object can then be resumed and move back through the subsequent set of states.

Modes

The Time Table can be set up in different modes allowing for non-repeating/repeating schedules or schedules based upon date and time. The Daily Repeat, Weekly Repeat, and Date Based modes all utilize the Model Start Time and Date as defined in the Model Settings.

  • None When the mode is set to none, the times listed in the table are absolute times based upon the model time units. The schedule will not repeat.
  • Daily Repeat If you set your Time Table to repeat daily, the Model Start Time (as defined in the Model Settings) does not come into effect. For example, if your Model Start Time is set to 08:00:00 AM and your Graphical Table looks like the above table, the members of the Time Table will begin the Model in an Operational state, and no functions will be fired. If however, you change the Model Start Time to 07:00:00 AM, when you reset and run your model, the Down functions will fire and the members will begin in a Down state. One hour later (based on the model time units, so 3600 seconds if the model time is set to seconds), the Resume functions will be fired and the members will begin their Operational Time.
  • Weekly Repeat Setting the Time Table to repeat weekly will behave similarly to the Repeat Daily, except that the Time Table will also take into account the Model start day of the week. If the Model Start Time begins on a Tuesday at 08:00:00 AM and our Time Table is set to the above values, then the Time Table will skip all of Monday and jump to Tuesday at 08:00:00 AM with the Time Table's members being Operational. When the Model Time hits Friday at 05:00:00 PM, the members will go Down and remain down until Monday at 08:00:00 AM where the Time Table will start over.
  • Custom Repeat The custom repeat mode is similar to the None mode, except you now have the option of specifying the repeat time for the table.
  • Date Based The date based mode allows you to set up down times where each down time is associated with a specific date. These dates are based upon the Model Start Date and Time (as defined in the Model Settings) as well as a Time Table start date and time. This mode does not repeat, however, you can create repeating events.

General Settings

The following general settings are available:

Name

The name of the Time Table. The combobox has a list of all Time Tables in the model, allowing you to quickly jump to different Time Tables.

Enabled

Specifies whether the Time Table should execute it's down times for all of the members of the Time Table. The Experimenter allows you to enable and disable Time Tables for different scenarios.

Icon Description
Adds the Time Table to a User Library as either a Draggable Icon or an Auto-Install Component.

The Members Tab

The Members tab has the following properties:

Icon Description
This will open an object selection GUI where you can select multiple objects in the model.
Removes the selected member(s) from the list.
Reorders members Up or Down in the list.
Click to sample any object in the model to add it as a member.

The Functions Tab

The Functions tab has the following properties:

Down Function

This picklist is executed when the objects in the member list go down. It is executed once for each object in the member list. This is where you specify what to do to stop the object.

Resume Function

This picklist is executed when the objects in the member list resume their operation. It is executed once for each object in the member list. This is where you specify what to do to resume the object.

On Down

This picklist is fired immediately after the Down Function has been fired for all objects, but it is only executed once, instead of once for each object in the member list.

On Resume

This picklist is fired immediately after the Resume Function has been fired for all objects, but it is only executed once, instead of once for each object in the member list.

The Table Tab

The Table Tab has the following properties:

General Controls

  • Mode - This specifies the mode of the Time Table, None, Daily Repeat, Weekly Repeat, Custom Repeat or Date Based.
  • Graphical / Table - Switch between the graphical and the table editors.
  • - This button will add the table to the model's Excel Importer. The imported table takes the form of the table (Time, State, Duration, Profile, DownBehaviour).

Table Editor

The Table Editor has the following properties:

  • Rows - This is the number of rows in the table.
  • Table - Each row records the following:
    • Time - This is the time since the table began that the state change should occur. If the mode is set to None, the table does not repeat, so the times listed in the Time column are absolute.
    • State - This is the state that the objects controlled by this table will change into when the Time Table tells it to go down. If you click on this column, a drop-down box will appear at the top, giving you a list of possible states. Refer to the 3D object reference for more information about what each state means to each object. Refer to the state list for a quick reference of each state's number and macro definition.
    • Duration - This is how long the objects will stay in the new state before changing back to their original state.
    • Profile - This is the state profile that the Down State is associated with. If you click on this column, a drop-down box will appear at the top, giving you a list of possible state profiles. Changing the State Profile will update the State column drop-down.
    • DownBehaviour - This is the Down Behaviour that will be used with the entry. If you click on this column, a drop-down box will appear at the top, giving you a list of possible Down Behaviours. A NULL Down Behaviour will use the behaviour defined on the Functions tab.
  • Repeat Time - Specify the time, in model time units, to repeat the Time Table.

Graphical Table

The Graphical Table has the following properties:

  • Snap To - Specifies the time to snap entries to in the view. By default there is no snap to. You can specify the preset 10 min, 15 min, 30 min and 1 hour, or set your own custom snap to time. The custom time is in model time units.
  • Calendar Start - Specifies the start date and time of the Time Table. Events that occur before the start time will not fire, however, the data will remain. This allows you to temporarily turn off parts of your Time Table if needed.
  • ... - Opens the model settings window.
  • Color - Select a label to color the events by. The color of the event will be equal to Color.byNumber(labelValue) or color(labelValue).
  • Start - The start date and time of the selected entry.
  • End - The end date and time of the selected entry.
  • Duration - The duration of the selected entry. Of form DD:HH:MM:SS.
  • Repeating Event - If checked, the event will become a repeating event. Here you can define how often the repeat occurs and either how many times it repeats or until which date and time it repeats to.
  • ... - Displays the properties of the repeating event.
  • - If the selected event is part of a repeating event but is not the parent event, this will center the parent event in the view and select it.
  • State Profile - Specifies the state profile for the down state of the selected entry.
  • Down State - Specifies what state the members should go to for the selected entry.
  • Down Behaviour - Specifies the Down Behaviour that will be used with the selected entry. A NULL Down Behaviour will use the behaviour defined on the Functions tab.

Using the Graphical Table:

  • Creating entries - Click and drag anywhere in the white space to create a new down time. Snaps to the Snap To time.

  • Modifying entries - Click and drag in the middle of an entry to change the start time of the entry. Drag left or right to change the time along the week, or drag up or down to change weeks. Click and drag at the left or right edge of an entry to modify the duration. Snaps to the Snap To time. Start and end times as well as duration can also be modified through the property below the editor view.

  • Selecting weeks - Click and drag along the left side of the view under the Date column to select a week of entries. Any entries with their start time in the selected week will be selected.

  • Zoom - Hold the Ctrl key while using the scroll wheel to zoom in or out on the mouse location.
  • Scroll - Use the scroll wheel to scroll up and down in the view.
  • Horizontal Scroll - Hold the Shift key while using the scroll wheel to scroll left and right.
  • Bottom Scroll Bar - Click and drag along the bottom scroll bar to zoom in/out and scroll left and right.
  • Drag to Copy - Hold the Ctrl key and click and drag an entry to create a copy.
  • Ctrl + C - Copy selected entries.
  • Ctrl + X - Cut selected entries.
  • Ctrl + V - Paste selected entries. If a single entry was copied, the pasted entry will be pasted below the cursor position. If an entire week was selected, the entries are pasted based upon the week that the cursor is positioned over, keeping start times relative to the start of the week.
  • Arrow Keys - Select an entry or a week of entries and use the up, down, left and right arrow keys to adjust the entry start times based upon the Snap To time.

Events

Down Function

This event is fired once for each member when the table hits a down time.

It has the following parameters:

Event Parameter Type Explanation
Down Object Object The object going down
State int The state the object will go into
Table Row int The row corresponding to this down time in the table
Duration double The duration of the down time
State Profile int The state profile on the object that will be updated

Resume Function

This event is fired once for each member when the table ends a down time.

It has the following parameters:

Event Parameter Type Explanation
Down Object Object The object that was down and is now resuming
State int The state the object was in
Table Row int The row corresponding to this down time in the table
State Profile int The state profile on the object that will be updated

On Down

This event is fired once after the Down Function has fired for all members.

It has the following parameters:

Event Parameter Type Explanation
Table Row int The row corresponding to this down time in the table

On Resume

This event is fired once after the Resume Function has fired for all members.

It has the following parameters:

Event Parameter Type Explanation
Table Row int The row corresponding to this down time in the table