Table of Contents

Table of Contents

Mass Flow Conveyor Behavior

The Mass Flow Conveyor Behavior Panel

The Mass Flow Conveyor Behavior panel defines the behavior properties for a mass flow conveyor.

The following properties are on this panel:

Speed

Defines the speed of the conveyor.

Generative Rate

This is used if you want the conveyor to be a source that generates mass flow units. You define a rate, in units per model time unit, and the flow unit that is to be generated. For example, if you are simulating a bottling line, and your model is defined in minutes, then a generative rate of 100 means the conveyor will generate 100 bottles per minute.

Upstream Output Order

Defines the ordering by which this conveyor should be chosen by an upstream conveyor in distributing its output flow. This is only used when the conveyor is one of multiple downstream conveyors that is connected to a single upstream conveyor, in other words, when the conveyor upstream of this conveyor must choose between multiple downstream conveyors in sending flow units. See Distributing Flow Downstream for more information.

Excess

Defines how the conveyor should handle excess flow that cannot be sent downstream. If Accumulate is chosen, then the excess will accumulate on the conveyor. If Track as Loss is chosen, then any excess flow will be tracked as loss, as if the product were to fall off the end of the conveyor. See Distributing Flow Downstream for more information.