RailWorks Objects

Overview

Name	Description	Image
Source Train	The Source Train object creates, with the help of the Process Flow, the trains that can be used in the simulation.
Rails and Curvedrails	Rails are the objects that represent the paths used by the trains to travel on the created system.
Rail System	The object Rail System is responsible for organizing the rails in groups and applying custom properties for each group.
Rail Control Point	You can add the Rail Control Point object at any part of the rail, this object signals that there is a task to be fulfilled at that position.
Station	One of the objects that can be connected to the Rail Control Point is the Station, its functionality is to make the train interact with the default FlexSim objects.
Locomotive	Locomotives are responsible for dictating the train power and speed.
Wagon	Wagons are responsible for keeping values like the weight of the train load.
Rail Crane	The RailCrane is also used for loading and unloading Flowitens from our Wagons, but different from the Station, it has an animation where the Flowitem is moved with the crane.

Source Train

The Source Train object creates, with the help of the Process Flow, the trains that can be used in the simulation. The Source Train itself does not create the train, but it needs to be used alongside the Process Flow task that creates the train.

Source Train

Custom Triggers

The Source Train object has the following custom triggers:

Rails and CurvedRails

Rails are the objects that represent the paths used by the trains to travel on the created system. They come in two types: rail and curved rail. Each Rail/Curved Rail represents a sector on the rail system, meaning that each object will hold only one locomotive at a time.

To connect a rail to another rail simply drag its end to the beginning of another rail, their Connect Points will connect to each other instantly and the system will recognize this connection as a possible path. In order to make a train move within the rails, you must tell it what its destiny via the Process Flow activity is.

Rail Object

CurvedRail Object

Rail Panel

The following properties are on the Rail panel:

Rail Speed Limit: Sets the speed limit for the selected rail.
Virtual Distance: Sets if virtual distance will be used and the virtual distance for the selected rail.

CurvedRail Panel

The following properties are on the CurvedRail panel:

Curve Angle: Sets the angle for the selected CurvedRail.
Radius: Sets the radius for the selected CurvedRail.

Custom Triggers

The Rail object has the following custom triggers:

Rail System

The object Rail System is responsible for organizing the rails in groups and applying custom properties for each group, such as the rail speed limit and the algorithm used for path decision. On the creation of the first rail of the model, a Rail System is created automatically.

Rail System

RailSystem Panel

The following properties are on the RailSystem panel:

Route Algorithm: Sets the routing algorithm used for the current simulation.
Maximum Active Trains: Sets the maximum number of active trains for the current simulation.
Fuel Usage: Sets if it will be used fuel consumption for the current simulation.
Timetable Logging: Sets if the timetable will be created and populated for the current simulation.

Rail Control Point

You can add the Rail Control Point object at any part of the rail, this object signals that there is a task to be fulfilled at that position. The train is always trying to figure out what its next destiny is, if the next destination is the Rail Control Point it activates that task.

The configuration of what type of task it holds is done on the current Rail Control Point, and the other objects involved in this task should be connected to the Rail Control Point as well. All the communication between the Rail Control Point and the object doing the task is made through message exchange.

You can also use the RailControlPoint to create locomotives and wagons on model reset. To do so, you need to create and configure the "PrecreateTrain" activity from RailWorks's Processflow library.

Rail Control Point

Custom Triggers

The RailControlPoint object has the following custom triggers:

Station

One of the objects that can be connected to the Rail Control Point is the Station, its functionality is to make the train interact with the default FlexSim objects, it can load or unload the wagons by consuming or creating Flowitens depending on the task, and assigning its value to the Wagon object, or even refuel the train.

Station

Station Panel

The following properties are on the Station panel:

Max Weight: Sets the max weight for the selected Station.
Units Per FlowItem: Sets the "Units Per FlowItem" rate. That means that one flow item will be X units in the Station.
Start Weight: Sets the starting weight for the selected Station.
FlowItem Class: Sets the type of FlowItem that the Station will produce.

Custom Triggers

The Station object has the following custom triggers:

Locomotive and Wagon

The train is divided into a few Task Executers as Flowitens, you can have two types of Task Executers, the Locomotive and the Wagon, Locomotives are responsible for dictating the train power and speed, while Wagons are responsible for keeping values like the weight of its load.

Freight Locomotive

Passenger Locomotive

Ore Wagon

Passenger Wagon

Hopper Wagon

Platform Wagon

Tank Wagon

Rail Crane

The RailCrane is also used for loading and unloading Flowitens from our Wagons, but different from the Station, it has an animation where the Flowitem is moved with the crane. This object is responsible for the communication between the RailWorks library objects and the default FlexSim objects, it connects the train on the rail with a Queue by default.

Rail Crane

RailCrane Panel

The following properties are on the RailCrane panel:

Movement By: Sets the type of calculation to the movement, that can be "Speed" or "Time".
Load Time: Sets the Load Time for the selected RailCrane.
Unload Time: Sets the Unload Time for the selected RailCrane.
SpeedXY: Sets the speed in the XY axis.
SpeedZ: Sets the speed in the Z axis.
Speed rZ: Sets the speed for the rotation on the Z axis.

Custom Triggers

The Station object has the following custom triggers: