Introduction to Moving, Resizing, and Rotating 3D Objects
FlexSim uses the classic Cartesian coordinate system to position objects within the model. For that reason, FlexSim uses the terms X, Y, and Z to refer to the axis coordinates for the position, rotation and size of the object:
- The X axis moves the object from left to right, resizes the object's length, and rotates the object using the X-axis as its center point
- The Y axis moves the object forward and back, resizes the object's width, and rotates the object using the Y-axis as its center point
- The Z axis moves the object up and down, resizes the object's height, and rotates the object using the Z-axis as its center point
The XY plane acts as the "floor" of your model, while moving objects along the Z axis moves objects vertically, or "up in the air." You can use either your mouse or the tools in the Visuals panel of Properties to move, rotate, and resize the objects in your model. This section of the guide will discuss both methods.
Moving 3D Objects
The simplest way to move an object is to click it and drag it to a different position in the model. This moves the object in the XY plane. To move the object up and down in the Z axis, click the object using both the left and right mouse buttons at the same time and, while holding down the mouse buttons, move the cursor up and down.
Using Axis Handles
When you click any object in a model, an "orb" will appear with several manipulation handles. We refer to those colored handles as the object's axis handles.
Each axis handle can be used to resize, rotate, or move the object, as follows:
- Drag the square handle to resize the object on that axis.
- Drag the cone handle to move the object along the axis.
- Right-click on an axis handle and move the cursor up or down to rotate the object around that axis.
- Drag the blue circle handle to rotate the object around the z axis.
- Drag the orange square handle to resize the object on all of its axes, preserving its size aspect ratio.
The following image shows the axis handles in action:
You might possibly want the location, rotation, and size of the objects to be more precise in your model. In that case, it might be better to use the Properties tool instead of using your mouse. This section will discuss some tips and tricks for setting an object's exact location, rotation, and size using Properties.
When you highlight an object in the model by clicking on it, the right pane displays the Properties for that particular object. In the Visuals panel, you'll see several different boxes for changing the object's position, rotation and size:
To the left of each row, you'll see three different graphical icons, as explained in the table below:
|Point of Reference
|Changes the object's position (location) within the model
|By default, the object's position is determined by the coordinates of the object's bottom center. However, you can change this point of reference by clicking the Position button. See Changing the Location Point of Reference for more information.
|Rotates the object
|The object will rotate on its center axis.
|Adjusts the object's default size
Every object in the FlexSim library has a default size. When you first created
the model, you set up the default units of measurement using the Model Units
dialog box. At that time, FlexSim automatically scaled the size of the objects
in the Library based on the units you specified.
For example, a Queue in the FlexSim Library is 2 meters by 2 meters by .2 meters by default. If you specified feet as your unit of measurement, the default size of the Queue in the FlexSim library would change to 6.56 feet by 6.56 feet by 0.66 feet.
Using each tool and its corresponding axis-coordinates, you can change the object's position, rotation, or size. The following table explains how each of the different tools can change the object based on the axis you are defining:
|Moves the object left and right on the X axis
|Moves the object forward and back on the Y axis
|Moves the object up and down on the Z axis
|Rotates the object on the X axis
|Rotates the object on the Y axis
|Rotates the object on the Z axis
|Resizes the object's length
|Resizes the object's width
|Resizes the object's height
Changing the Location Point of Reference
By default, the point of reference on the object that determines the object's location is the bottom center, as shown in the following image:
When you view an object's location in Properties, it displays the location coordinate for this point of reference by default.
However, you can change the point of reference if needed:
- Click the object in the 3D model to select it.
- In Properties, click the Position button to open a menu:
- As you mouse over a different point of reference, the 3D object will display the location of that point of reference is on the object, as shown in the following example:
- Select the desired point of reference on the object. Notice that the position settings in Properties will change to display the exact coordinates for this point of reference on the object, even though the object has not moved.
- Edit the coordinates as desired. The new location coordinates will be calculated based on this point of reference.
Rotation Affects the Point of Reference
Be aware that when you rotate the object, the point of reference will rotate with the object. For example, the following image shows the upper left object when it has been rotated 90 degrees on the Y-axis:
The Direct Spatials reference point works differently than all the above options. Selecting this option will display the position of the object as the spatial values of the object stored by the software. These spatial values are calculated off the back left corner on the bottom of the object before any rotations are applied. Because this value is not very useful after an object has been rotated, this mode is not normally recommended.
This mode is useful when you want direct access to the values stored by the software, for example, when using the position of the object as an experimenter variable.
Setting or reading the object's location through code will generally return these Direct Spatials values. However, you can use the Object's setLocation and getLocation methods which allow you to additionally specify the Point of Reference.